We have two CNC linear winding machines with the following specifications

• Winding Speed - 9500 RPM
• Winding width 100mm +
• Swing diameter 100mm
• Wire Diameter 0.015 mm to 1.50 mm
• Make - Electromech and Silchar

We have five CNC Toroidal winding machines with the following specificationsns

• Max finished OD 60 mm
• Min finished id 12 mm ( lesser finished ids can be achieved)
• Max finished height 30 mm
• Speed 1500 rpm
• Make - Electromech

Some of the characteristics of our LCR meter

• Range- capacitance 20,000 micro farads ( 9 decade ranges)
• Inductance - 2,000 h ( 8 decade ranges)
• Resistance - 20 mega ohms ( 7 decades ranges)
• Resolution at 200 micro h/picof/20 ohms ranges
• 0.1/ microh/0.1 pico farad / 0.01 ohms
• Measurement frequency and mode of measurement
• CP up to 2 micro farad range - 1 khz
• CP up to 2 micro farad range - 1 khz
• CS above 2 micro farad range - 100 hz
• LP above 2 h range - 100 hz
• LS up to 2 hz range - 1khz
• RS all range - DC
• Maximum DC bias up to 20 v can be applied

Our computerized LCR meter has the following specifications

• Inductance (L) 0.1 Micro H TO 100 H; Frequency 50 Hz to 10,000 Hz. Capacitance (C) 1Pf to 200 micro F
• Turns ratio is programmable and can measure all the required magnetic and electrical parameters
• ESR / EPR can also be measured